Inline high-shear emulsifying pump

In-line High Shear Emulsification Pump

Product Introduction:

The in-line high shear emulsification pump is a device that efficiently, rapidly and uniformly introduces one or more phases (liquid, solid, gas) into another immiscible continuous phase (usually liquid). Generally, each phase is immiscible. When external energy is input, the two materials are recombined into a homogeneous phase. Due to the high tangential speed generated by the high-speed rotation of the rotor and the strong kinetic energy brought by high-frequency mechanical effects, the three-stage in-line shear pump subjects the materials to comprehensive effects such as strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing and turbulence in the narrow gap between the stator and rotor, forming a suspension (solid/liquid), emulsion (liquid/liquid) and foam (gas/liquid). The horizontal in-line three-stage shear pump enables the immiscible solid phase, liquid phase and gas phase to be instantly and uniformly finely dispersed and emulsified under the combined action of corresponding mature processes and appropriate additives. Through the circulation of the high-frequency shear pump, stable high-quality products are finally obtained.

Product Features:
1. The working chamber is equipped with three sets of rotors and stators, which can be selected as two-layer, four-layer or six-layer.

2. The motor is elastically connected to the bearing housing, and the bearing can be lubricated with grease or oil.
3. Modular design, convenient disassembly and assembly, low part replacement cost.
4. Various sealing forms can be selected according to process conditions.
5. Applicable temperature: -20℃ to 160℃; customization is required for temperatures outside this range.
6. The working chamber can be equipped with a jacket to cool or heat the materials.

Application Fields:

The single-stage high shear emulsification pump is suitable for emulsification and homogenization of fluids with various viscosities below 10,000 cps, such as water-based and oil-based inks, industrial paints and wood paints, various color pastes, pesticide suspensions, asphalt, fruit juice and jam, lubricating oils, cosmetics, dairy products, textile auxiliaries, etc.

1 Fine chemicals: pigments, dyes, coatings, paints, plastic resins, inks, pastes, slurries, hot melt adhesives, flame retardants, adhesives, finishing agents, surfactants, leveling agents, anti-sticking agents, defoamers, brighteners, rubber auxiliaries, plastic auxiliaries, dye auxiliaries, flocculants, coagulants, solvents, silicone oils, emulsified resins, emulsified carbon black dispersion

2 Petrochemicals: lubricating oils, heavy oil mixing, heavy oil emulsification, water-in-oil emulsification, oil-in-water emulsification, diesel emulsification, modified asphalt, emulsified asphalt, catalysts, wax emulsification

3 Pesticides and fertilizers: fertilizers, pesticide emulsification, pesticide auxiliaries, pesticide intermediates, emulsifiable concentrates, insecticides, herbicides, seed coating agents, fungicides,   urea, compound fertilizers, emulsifiable concentrates, wettable powders

4 Biomedicine: cell pulping, serum, vaccines, protein dispersants, pharmaceutical creams, antibiotics, sugar coatings

5 Daily chemicals: skin creams, skin lotions, detergents, preservatives, hair care products, toothpaste, daily flavors

6 Food industry: food additives, flavors, fragrances, fruit juice, jam, ice cream, dairy products, chocolate, non-dairy creamer

7 Coatings and inks: interior and exterior wall coatings, latex paints, nano coatings, building adhesives, light-curable coatings, inks, carbon black, coating auxiliaries, kaolin, bentonite

8 Paper industry: pulp adhesives, rosin dispersion, calcium carbonate fillers, auxiliaries, pigment mixing, resin emulsification

9 Environmental protection: wastewater, sewage treatment, modification, recycling

10 Others: paper making, ceramic slips, rust removers

Equipment grades: chemical grade, sanitary grade I, sanitary grade II, sterile grade
Motor types: ordinary motors, variable-frequency speed-regulating motors, explosion-proof motors, variable-frequency explosion-proof motors, pneumatic motors
Power supply options: 380V/50HZ, 220V/60HZ, 440V/50HZ
Motor accessories: PTC thermal protection, noise-reducing type
Emulsification pump materials: SUS304, SUS316L, SUS316Ti
Emulsification pump options: liquid storage tank, drain valve, frequency converter, control cabinet, mobile cart
Emulsification pump surface treatment: polishing, wear-resistant treatment
Inlet and outlet connection types: flanges, screw threads, clamps
Emulsification pump compatible containers: This equipment is suitable for containers of various sizes

1. The medium used to measure the upper limit batch processing capacity in the table is water;

2. The processing capacity depends on the viscosity of the material and the required quality of the final product;

3. This series of models has short-distance feeding capability and no self-priming function; high-level feeding must be used. If the material cannot be fed and transported normally due to high viscosity or high solid content, a pressure or transfer pump must be used for feeding or conveying, and the pressure and flow rate of the transfer pump must match the selected model;

4. If you encounter difficulties in model selection, please contact Yuedi Company by phone, and our sales engineer will provide you with relevant information;

5. For special requirements such as high temperature, flammability, explosiveness and corrosion, please confirm in text form before customization to avoid danger and losses;

6. The data in this table may be inconsistent due to technical improvements or customization; please refer to the actual product.